Description: This is a used and now discontinued immobilizer module, also known as a Sentry Key Remote Entry Module (SKREEM), or Wireless Control Module (WCM) . As part of our programming, the steering column lock is deleted from the configuration. This is to resolve the code B2254 Column Lock Module Internal, which is the most common reason for immobilizer system failures on export models. You will have to unplug the steering column lock prior to installation, and it may be necessary to remove it entirely.This module will be programmed to your VIN with two new uncut remote head keys making it plug and play without any further programing needed. Simply have the keys cut to match your ignition lock, install the new module, and you're done.Not sure if this fits your vehicle? Send us your VIN and we can look it up. Models which have a tire pressure monitoring system (TPMS) will automatically relearn the tire pressure sensor IDs after about 20 minutes of driving above 20 MPH.This module also comes unlocked with the secret PIN code to allow programming of extra keys and to allow VIN and PIN transfer from immobilizer to ECU via scan tool in the event of ECU replacement.Please verify your part number before ordering. This part comes with a 60 day warranty, upgradeable to lifetime with return of core (any condition accepted). We provide a free return label for the core.We can not begin to process your order until we get your VIN number. Avoid processing delays. Leave your VIN at the time of purchase or send us a message.Please note that the VIN that you send us MUST match the VIN programmed into your engine computer for this module to be plug & play. If it does not, your mechanic will need to run a "PCM Replaced" routine. This will update the VIN in your engine computer to match VIN your vehicle's titled VIN.Please be certain this is the part you need before ordering. Please check the vehicle compatibility section, and if you have any questions or concerns, feel free to contact me.30 Day Return PolicyA return for this item may be started for any reason within 30 Days from the date tracking shows it was delivered.Shipping PolicyOrders received before 10:00 a.m. EST Monday through Friday will usually be shipped the same day.Warranty PolicyFor purposes of warranty, start date will be on date of delivery confirmation. End date will be 60 days later if no core is returned, or lifetime if core is returned.Returns will only be accepted if they bear my mark and have not been altered in any way.Where applicable, warranty returns will be tested.If the item is found to be defective, I will at my discretion do one of the following: 1) Repair the part if possible and send it back to you.2) Replace the part with an equivalent part if one is available.3) Issue a store credit in the amount of the purchase price.Warranty and 30 day return policy overlap and refund is available if part fails within first 30 days.
Price: 450 USD
Location: Buffalo, New York
End Time: 2024-12-26T09:13:34.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Jeep
Model: Grand Cherokee
Type: Immobilizer Transceiver
Interchange Part Number: 05026190AB, 05026190AC, 56040638AK, 56040638AL, 56040638AM, 56040638AN, 56040638AQ, 56040638AR, 56040638AS, 56040638AT, 56040638AU, 56040638AW, 56040638AX, 56040638AY
Placement on Vehicle: Dash
Fitment Type: Direct Replacement
Mounting Hardware Included: Does Not Apply
Manufacturer Part Number: 56040638AS
Compatible Years: 2005-2007
Country/Region of Manufacture: Unknown
Warranty: 60 Days / Lifetime With Core Exchange
