Description: Feature:1. Support 0-55MHz continuous adjustment, the frequency is 1Hz. 2. The generator has a 78L05 voltage regulator. When the input current is 200MA, the input voltage of 8-9V will be the ideal voltage. 3. The 12V input voltage can only be used for short-term testing, otherwise it will cause the board to heat up. 4. 5p/6p connect to encoder as per photo. 7p of the middle connects to digital matrices input. 14p (8V GND) is 8V power supply from main board. 5. If powered by the motherboard, the DDS does not require a separate power supply. 6. 1 to 6 correspond to 6 frequency bands: 3.8, 7, 9, 14, 18 or 21, 27 or 29. 7. ISB, USB, CW are the three mode choices. 8. DT is a signal from main board. Specification:Item Type: Signal Generator Display: 1602 LCD Input Voltage: DC 8V-9V Input Current: 200mA Frequency Range: 0-55MHz 6 Bands: 3.8, 7, 9, 14, 18 Or 21, 27 Or 29 Product Size: Approx. 80 x 45 x 30mm / 3.15 x 1.77 x 1.2in Keys and Connection Interfaces: ENC: Encoder switch MEM: Switch for memory mode VFO: Transfer from VFO A to VFO B, or from VFO B to VFO A. SSB: Working mode change: circulate from USB, LSB, AM, CW, then keep looping... RIT: Fine tuning to receiving frequency CAL: Set functions KB-1 and KB-2 have common shared pin, but is not GND
Price: 33.26 USD
Location: Shenzhen
End Time: 2025-01-18T11:13:11.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Battery Included: as Description
Brand: Unbranded
Compatible Brand: as Description
Form Factor: as the picture shows
Manufacturer Part Number: Does not apply
Model: Does not apply
MPN: Does not apply
Part Type: as the picture shows
Type: as the picture shows
Voltage: as Description
