Aquatec CDP 5853-2LM2-B534 Booster Pump Assembly for Aeroponics System HIGH PSI

Description: Aquatec 5853 Booster Pump Assembly for 100-200GPD Aeroponics systems (pre-wired) MADE IN U.S.A. Aquatec pump 5853-2LM2-B534 (custom made pump for aeroponics and misting and 300GPD RO systems) Our internal part # SET-HF8855 (for 1/4" tubing connections) ** Main difference between this item and SET8855-300 is the Pressure Switch designed for Aeroponics system ** Optional 3/8" connectors available. If you need 3/8" connection solenoid valve or pressure switch, it will be $8 extra, please let us know Why buy from us? Best price and best service. We offer free tech support on the pumps, setup, and its applications. We get the pumps directly from the manufacturer so they are always under warranty and most up-to-date. All brand NEW. This water booster pump assembly is designed to be used for 100GPD to 200GPD Aeroponics water systems. It is pre-wired so that the installation would be easy and neat. The Pump assembly includes: Pump Aquatec 5853 pump to boost input water pressure up to 130 psi Reducer fitting: Two reducer fitting 3/8" to 1/4"; this pump has standard input/output of 3/8" Transformer: 115VAC to 24VAC, 2.5 Amp, plug in to regular 110V electrical outlet, USA plug. Pressure switch (100PSI): to make the pump and RO system function automatically. It turns on/off the pump and solenoid valve when RO pure water output is closed or when the pressure tank is full. Solenoid valve: to turn off water supply when pressure switch turn it off, and turn on water when it is making water. Pressure gauge: to indicate pump output pressure Instruction sheet. NOTE: Aquatec 5853 pump has an internal bypass mechanism it does not allow pressure to go higher than 130 psi for this model. NOTE: This pump assembly is not for continuous duty. If you need to run the pump more than 4 hours, you can use a timer to turn on one hour and turn off for 1/2 hour to cool down the pump and solenoid valve, or you can put a fan to blow air into the pump assembly to cool it down. Specifications: Booster Pump: Boost pressure If input water pressure is about 30 to 40 psi, the pump will boost pressure to about 70 to 80 psi for RO systems Water open flow 3.8 liter per minute Electrical: 24VAC Connection Inlet and outlet, 3/8" quick connect, connects to 3/8" OD tubing. Also included two reducer fitting 3/8 to 1/4, so you can use 1/4" OD for input /output Motor Permanent Magnet, 24VAC, enclosed PUMP Diaphragm pump, 3 chamber, self-priming. It is able to run dry Material: Housing Nylon Valves EPDM Diaphragm Santoprene Fasteners Stainless Steel Dimension diameter = 3.5" , length = 7.5" Solenoid valve Type Normally Close (NC) orifice opens when electrically energized Electrical: 24VAC, Leads = 20 AWG Water pressure 0 to 120 psi Connection: two ¼”x ¼” fitting included: connect to ¼” tubing Mounting It has two screw holes for mounting Material: valve Plastic valve body Solenoid brass outside body, stainless steel internal parts Pressure switch Type: Normally closed (NC) will cut off circuit when water pressure reaches 100 psi (adjustable + - 10 psi) Pressure Cut off pressure at 100 psi, maximum inlet pressure 120 psi Connection ¼” compression , connect to ¼” tubing Material Polypropylene Electrical: leads 20 AWG, 14” long Max: 10A, 250Volts Transformer Input 115V/60Hz Output 24VAC 2.5 Amps Leads 18 AWG, 4 feet *Important Note: 8855 is FilterDirect internal part number which is different from Aquatec part number. There will be an overlay sticker #8855 affixed onto the pump and this is not against Aquatec policy. FilterDirect is an authorized distributor of Aquatec. If you have any doubt about our products and services please do not make a purchase.

Price: 168 USD

Location: Santa Ana, California

End Time: 2023-12-21T16:55:48.000Z

Shipping Cost: 0 USD