BMW E30 STAINLESS STEEL COMPLETE 6 BRAKE LINE KIT - DOT COMPLIANT

Description: It's no secret that the BMW E30 stock brake system can use some help. This is by far the best bang for buck mod for your E30 braking system. Rubber lines are cracking by this age in the E30s life. Even when new the stock rubber expands when you press the brake pedal. They expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel and makes for mushy pedal feedback. Stainless steel brake lines improve braking performance. They stiffen your E30s pedal for a more direct feel. If you've driven a stock BMW E30, you know that the brakes are nothing to write home about. The braking power of your E30, will not only set your better track times but it will also ensure your safety on the road; most people believe that track times are synonymous with power, when it comes to your car, not driving ability, it's really a proportionate ration between horsepower to your braking ability and a handful of other variables. Your bimmer has untapped potential, stainless steel brake lines are a very cost-effective upgrade that you'll notice immediately, as will your track times. BENEFITS OF STAINLESS STEEL BRAKE LINES Inner Teflon® line is covered with a woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. The results will be immediate! Not to mention they are fully compliant with DOT Standards (MVSS-1006), have a lifetime warranty, and are burst-tested to 6000psi ( the maximum tested pressure from a BMW braking system is 1200psi). Unlike other brands out there, our brake lines have Teflon® inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (plastic covering). We even have plastic end pieces so there are no exposed steel fibers. Be sure to have a qualified installer to make sure they are responsible for correct fitting and bleeding procedure as recommended by BMW. As brake line installation is a safety-related item, the installer assumes all responsibilities and risks associated with brake line replacement. Made in the USA, and fully DOT compliant. DOES THIS FIT MY BMW E30?Fits 84-91 BMW E30 Models: 325e, 325es, 325i, 325is, 325ic, 318is, and M3DOES NOT FIT E30 325ix and 84-85 318i If you are unsure of your E30's compatibility, please check your VIN at realoem.com or contact us! Please look at the pictures it shows you exactly what you get and the condition. We try to describe the items as much as we can but pictures are the best way to describe an item! GARAGISTIC E30 STAINLESS STEEL COMPLETE 6 BRAKE LINE KIT It's no secret that the BMW E30 stock brake system can use some help. This is by far the best bang for buck mod for your E30 braking system. Rubber lines are cracking by this age in the E30s life. Even when new the stock rubber expands when you press the brake pedal. They expand under the normal pressure of use. This expansion of the brake line negatively affects the brake caliper piston travel and makes for mushy pedal feedback. Stainless steel brake lines improve braking performance. They stiffen your E30s pedal for a more direct feel. If you've driven a stock BMW E30, you know that the brakes are nothing to write home about. The braking power of your E30, will not only set your better track times but it will also ensure your safety on the road; most people believe that track times are synonymous with power, when it comes to your car, not driving ability, it's really a proportionate ration between horsepower to your braking ability and a handful of other variables. Your bimmer has untapped potential, stainless steel brake lines are a very cost-effective upgrade that you'll notice immediately, as will your track times. BENEFITS OF STAINLESS STEEL BRAKE LINES Inner Teflon® line is covered with a woven stainless steel braid that will not expand under pressure. The advantages include better brake pedal feedback and a firmer pedal, along with superior brake modulation. The results will be immediate! Not to mention they are fully compliant with DOT Standards (MVSS-1006), have a lifetime warranty, and are burst-tested to 6000psi ( the maximum tested pressure from a BMW braking system is 1200psi). Unlike other brands out there, our brake lines have Teflon® inner line covered with a woven layer of stainless steel and covered in an abrasion-resistant material (plastic covering). We even have plastic end pieces so there are no exposed steel fibers. Be sure to have a qualified installer to make sure they are responsible for correct fitting and bleeding procedure as recommended by BMW. As brake line installation is a safety-related item, the installer assumes all responsibilities and risks associated with brake line replacement. Made in the USA, and fully DOT compliant. DOES THIS FIT MY BMW E30?Fits 84-91 BMW E30 Models: 325e, 325es, 325i, 325is, 325ic, 318is, and M3DOES NOT FIT E30 325ix and 84-85 318i If you are unsure of your E30's compatibility, please check your VIN at realoem.com or contact us! Please look at the pictures it shows you exactly what you get and the condition. We try to describe the items as much as we can but pictures are the best way to describe an item! IMPROVED BRAKING Most cost-efficient way to better brake pedal feel, modulation, firmer pedal, and better braking response. FITS E30 MODELS This brakeline kit fits all '84-'91 E30, does not fit the 325ix or '84-'85 318i. We also have other variations available for the E36, E46, and others. DOT COMPLIANT Fully DOT compliant, meaning they were manufacturered to meet the safety standards of the Department of Transportation! BETTER PAIRED WITH THE FOLLOWING PRODUCTS CLUTCH LINES Our stainless steel clutch lines ensure consistent pedal feel and performance. All USA made and DOT compliant. BRASS ATE BRAKE CALIPER BUSHING SET Our brass guide bushings eliminate caliper twisting caused by rubber guide pin bushings. BRONZE CLUTCH & PEDAL BUSHINGS Eliminate all noisy or loose clutch pedal arm with our bronze pedal bushings! PaymentShippingReturnsFeedbackPayment PaymentShippingReturnsFeedbackPayment Payments can be made via the payment methods on the eBay platform. We accept PayPal, and most credit/debit cards that can be processed on this platform. No shipments will be arranged until payment is successfully processed. Please refer to our returns & exchanges policies for details on any returned payments.PaymentShippingReturnsFeedback Shipping PaymentShippingReturnsFeedback Shipping Shipping fees are the responsibility of the buyer unless otherwise specified. Shipping across the continental United States may vary across states. All shipping rates are calculated from the live rates of each carrier that is used. Please be aware that we do not control these rates, and these rates are subject to the live supply/demand of the freight containers/pallets at any given time. International orders may incur higher shipping rates depending on the region and carrier selected. Large/oversized items may have an extra fee to process. Please double check all shipping rates before purchasing.PaymentShippingReturnsFeedback Returns PaymentShippingReturnsFeedback Returns Garagistic is committed to 100% customer satisfaction! If you are unsatisfied with your purchase, you may return your purchase within 30 days of the ship date STILL IN ITS ORIGINAL PACKAGING. WE DO NOT ACCEPT RETURNS ON ANY USED OR INSTALLED PARTS. Some items will be subject to a 20% restocking fee, as well as any order returned after 30 days. We do not accept returns on clearance items. All clearance items are final sale and the buyer is responsible for confirming fitment of any application outside of stock configuration. We do not accept returned customized or made-to-order items such as chassis mount shifters, supreme OEM shifters, driveshafts, wiring harnesses, engine mounting kits, roll bars etc (please contact us if you are unsure if you part falls under this category） We do not refund shipping costs. We reserve the right to refuse a return on any orders after 30 days. On returns authorized past 30 days from purchase we reserve the right to give store credit instead of a refund (please reach out to confirm). We absolutely do not accept used or damaged items for return. It is your responsibility to make sure that returned items arrive to us in good condition please pack your items accordingly. We reserve the right to refuse a return on any items not authorized before hand. It is the customers responsibility to arrange return shipping for any items that are rejected through the return process.PaymentShippingReturnsFeedback FeedbackPaymentShippingReturnsFeedback Feedback If you have some thoughts about how we can better improve your customer experience, please leave us a feedback on our eBay store! This helps us improve our customer and product experience, we'd greatly appreciate it! FOR INSTRUCTIONS || LEAVE US A REVIEW || OTHER GARAGISTIC ITEMS FOR SALE || YOUTUBE || INSTAGRAM || DOWNLOAD OUR APP Listing and template services provided by inkFrog

Price: 130.81 USD

Location: Westminster, California

End Time: 2025-02-14T03:20:53.000Z

Shipping Cost: N/A USD