Commodore Amiga A4000D Computer + BFG9060 Accelerator, 1 TB SSD, RTG and More

Description: Amiga A4000D Refurbished + BFG-9060 (68060 Rev 6 at 100 MHz), New "GBAP II++" RTG Zorro II graphic card, Recapped motherboard, 1 TB SSD, working RTC, and 146 MB total fast RAM Refurbished A4000D recapped, steel RAM clips holding a full 16 MB on board RAM, replaced and working RTC clock (coin cell), fitted with AmigaOS 3.2.2 ROMs Inside is a 128 MB RAM, BFG-9060 – a 68060 Rev 6 CPU (MMU & FPU) and clocked at 100 MHz. BFG9060 - See specifications belowAn unopened, unregistered OS 3.2 CD is part of the sale – Registration number is on the cellophane wrapper on the backside - do not discard the cellophane before registering the number with HyperionA1 TB TeamGroup 2.5” SSD (not a CF card), Sony DVD R/W drive, and Amiga HD floppy, fill out the front.The GBAPII++ is a ZorroII RTG card featuring the fast Cirrus GD5434 graphics chip and 2MB of video-ram output via a VGA port. The maximum screen resolutions are 16.7M –color up to 800x600, 64k-colors up to 1024x768 and 8bit color up to 1280x1024. All modes are non-interlaced, with a minimum refresh rate of 60 Hz.The keyboard lock is functional, and the keys are supplied; they should be stored safely away as when the lock is engaged, the mouse and keyboard fail to functionThe included A4000 keyboard fully works, and its keys have been replaced with new (non-yellowing) ones from A1200.netAmiga Test Kit (including the use of the port test dongles) was used to establish function.An original Amiga mouse is included.An Amiga Power Stick Joystick is included as wellLastly, a thumb drive of booklets, articles and manuals is included to help with the software’s use.Storage:The 1 TB SATA Solid state drive has a full complement of OS, productivity, office, and WHDload games. Obviously, there is plenty of room for fast access storage.High Density Floppy DriveSony DVD/CD Drive (R/W)Included, but not on the drive chain (IDE cable) is a 40-pin IDE to CF card interface, tucked in the Expansion Slot in back; the A4000 supports a 4-way A4000™ 4-Device IDE interface. This interface overcomes this factory limitation by providing two IDE connectors. The A4000 IDE interface allows two devices, so with an adapter a total of up to 4x IDE devices is possible. This device is included, but not photographed nor attached; the software (IDEfix’97) is available in the “Storage:Disks” folder as an adf file.System Partition – contains the Amiga OS 3.2.2.1 installation plus various tools, utilities, devices and useful day-to-day programsWork Partition – holds a plethora of graphics, music, and office software, as well as, various programming languages.WHDs Partition – lists in alphabetic drawers around 6.5 GB of games (from the Web), a couple of launchers, etc.Storage – has copies of all the system software back to OS 3.1 up to the most current updates (3.2.2.1) of the AmigaOS. Disk images and downloads are stored there with an Icon and Image selection useful for desk work.Video Output options:This Amiga has native NTSC output (can be “jumpered” to PAL on the motherboard - J212 - This is a three pin jumper. If pins 1 and 2 are connected, If pins 1 and 2 are connected, the system defaults to an NTSC system. If pins 2 and 3 are connected, the system defaults to a PAL system). The screenshots were taken on a NTSC (Dell U2410) monitor, and the WHDload preferences has been set to PAL to adjust the screen for game play. This means PAL games stored on the 6.5 GB WHDload partition will display properly (not all games were vetted with the included kickstarts).23-pin Original Sync generating video dongle Product part number: 390682-03 Amiga Video-to-VGA makes it ready to connect to a 15 kHz monitor – the adapter was designed for use with the Video Toaster; all screenshots were done connected to an NTSC Dell U2410 monitor (not included).BFG-9060 Technical SpecificationSupport for Motorola/Freescale 68060 and 68040 Processors - currently a Rev 6 68060 with full MMU & FPU over-clocked at 100 MHz128 MB of DMA-capable Fast RAM with record-setting access speedCPU temperature and voltage monitoring via I²C and a CPU fan is attachedF0 ROM that enables the use of the card in machines with Kickstart/AmigaOS 3.1 without further modificationOverclocking capability up to 100 MHz with full 68060 Rev. 6 CPUsOnboard 5V header to connect a CPU fan - a 40 x 40 mm Noctua *Please ask questions before considering this (or any) purchase; after a sale I can provide thorough help, assistance, and recommendations from my 37 years of Amiga ownership (50 years of computer experience), refurbishment and use, if asked. I consider this as a service provided with the purchase of this Amiga. Standard eBay Disclaimer: This is a refurbished A4000 from 30 years ago; it has been restored to work, but may have flaws, blemishes, DIY 3D parts and other non-original items. These computers are no longer in production and parts may be impossible to locate at reasonable prices, hence, it is sold “as is.” This case is not new, please look closely at the supplied photos, as I cannot guarantee there are not unseen issues.Absolutely every part was neither photographed nor tested ad nauseam to guarantee it works to your satisfaction. This is refurbished to the buyer's expectation; I cannot state that it will do anything more. It should function with proper handling and care for the time being. See Screenshots of testing.Any parts cleaned of yellowing (often keycaps), have had an “archival” UV protection coating applied (the same used in art galleries) to best protect the 30-year-old plastic underneath from immediate light and heat induced aging.Please do not purchase if you do not understand this, and that my 4K photos uploaded to this site, may be reduced in quality by the hosting server and/or shown at lower resolutions, blurred or with flaws not visible on your monitor. Your monitor resolution and quality are not my fault.The 23-pin Amiga to VGA adapter was sourced from an Amiga A4000T Please feel free to contact me before or after purchase, I will try to answer any questions or concerns that you may have. I try to put together a package from the wall socket to modern monitor, despite reliance on modern parts. I do not leave buyers' "high and dry" after sales. Likewise, I will do what I can to make a difficult situation better. In case of shipping damage, please take photos of the box and all damage, and contact me as well as the shipping company as soon as possible. I obtain shipping insurance beyond what eBay and the carriers say they offer, and these photos help me recover the funds to correct the sale to the buyer. ---

Price: 4299 USD

Location: Lafayette, Indiana

End Time: 2025-01-06T18:29:46.000Z

Shipping Cost: N/A USD