Description: The Powermax85 SYNC is a next-generation professional grade air plasma system that dramatically simplifies system operation for cutting and gouging up to 25 mm (1″). Features automated system process set-up via advanced RFID-enabled SmartSYNC torches and a revolutionary single-piece cartridge consumable that provides trackable utilization data. The Powermax85 SYNC maximizes productivity through reductions in downtime, optimized cut quality performance and streamlined consumable inventory management.Sync systems contain an end-of-life consumable detection on the torch and the power source, letting the user know when to properly change the cartridge. The cartridge also retains its end-of-life status so it can not be re-used improperly.Smart Sync Torch FeaturesInternal Cap Sensor - confirms the cartridge is installed correctly.Cartridge Reader - reads information on the RFID chip and relays it to the power source.LED - visual indicators on the handle show system ready state.7-Step Amperage LED - allows user to select one of seven preset values.Torch Lock Switch - allows consumable changes without turning off the power supply.Safety Trigger - protects the operator from accidental activation.Fiber Reinforced Handle - ensures long life operation and protection if dropped.Spring Strain Relief - protects the torch lead connection to the torch handle.Abrasion Resistant Torch Lead - protects the lead when being dragged over rough surfaces.End-of-Life detection is disabled when one of the following occur• A Fine Cut hand cutting cartridge is installed• The amperage is set below 40 amps for any type of cartridge• The output amperage is set below 55 amps and no communication between the cartridge and systemSYNC Features• Color Coded Single-Piece Cartridge Consumable (Hand, Mechanized/Stand Off, Gouging, and FlushCut/HyAccess)• Radio Frequency Identification (RFID)• Consumable Life Data TrackingQuick Specs• Input Voltage: 200-600V | 1/3 Phase | 50-60 Hz• Duty Cycle: 240-600V - 100% @ 66A | 200-240V - 50% @ 85A• Power Source Weight: 67 lbs• Dimensions: 19.7" L x 9.2" W x 17.9" H• Travel Speed: 20 ipm on 1" Metal• Recommended Air Pressure: 85 psi (5.9 bar) | 400 scfh (6.7 scfm)• Warranty: 3 years on Power Source | 1 year on TorchIncludes• Powermax 85 Sync Power Source w/CPC Port• 35ft 180 Degree Mech and 25ft 75 Degree Hand Smart Sync Torch• Work Clamp with 25ft Lead• (2) 85A Mech and (2) 85A Hand Cartridges• Operator and Safety Manuals
Price: 6400 USD
Location: Indianapolis, Indiana
End Time: 2025-01-13T16:01:42.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Hypertherm
MPN: 087191
Item Type: Plasma Cutter
Country/Region of Manufacture: United States
