Mentor Sports Maestro Putter Carbon Center Shaft Adjustable 333 to 403 grams

Description: This listing is for a Mentor Sports V-MOI Maestro adjustable-weight putter. This blade-style putter features 2 weight ports for adjusting the weight of the putter head as well as to vary the moment of inertia (MOI) to tune the head for forgiveness or feedback on mishits. The top of the putter provides two alignment lines on different planes to ensure your eyes are directly over the center of the putter face. The shaft is configured without any offset to provide visual cues that promote consistent ball placement between your stance. NOTE: This putter is configured for a straight center shaft using a special hosel adapter that produces a face balance. This allows for possible future conversion to a double bend heel shaft by removing the adapter or to a plumber's neck using a different Mentor Sports hosel adapter. The complete package includes the following: 1. Mentor Sports V-MOI Maestro putter (carbon steel)2 weight ports (heel and toe)333 gram base weight (no weights and no mounting screws installed)403 gram maximum weight in standard configuration5 standard weight configurations using included weightsNickel-plated carbon steel construction that is CNC-milled from billetSteel straight center shaft (via hosel adapter) that yields a face balance with symmetrical weight configurationWinn Medallist pistol grip NOTE: While this putter is considered to have 2 weight ports, one for the toe and one for the heel, they function as a single continuous weight port that runs along the entire length of the putter head. As there are several mounting screws across the head, the weights do not necessarily have to be placed at any specific position in the port, not even completely within the putter head, as long as they can be firmly fixed by at least one mounting screw. This allows for considerable flexibility in not only which weights to mount, but also where to mount the weights. The 5 standard, face-balanced configurations are:No weights1 A17 weight, centrally-mounted (i.e. spanning central cavity, mounted with the two inner-most screws)2 A17 weights, heel/toe-mounted2 S10 weights, heel/toe-mounted1 A17 weight, centrally-mounted AND 2 S10 weights, heel/toe-mounted Some examples of non-standard configurations are:1 S10 weight, heel-mounted AND 1 A17 weight, toe-mounted: very slight heel-down balance2 S10 weights, both toe-mounted: slight toe-hang balance2 S10 weights, both heel-mounted: slight heel-down balance2 S10 weights, heel/toe-mounted (each protruding into central cavity) AND 2 A17 weights, heel/toe-mounted (each protruding out of the extremities): face balance 2. Weights2 x A17 weight (15 grams each)2 x S10 weight (25 grams each)NOTE: Check my other listings to purchase additional weights. 3. 6 mounting screws 4. Hex wrench 5. Head cover custom manufactured by AM&E Specifications: General:Style: BladeHead Material: Carbon steelBalance Type: Face-balancedLie Angle: 72 degreesLoft: 3 degreesShaft/Hosel Type: Straight center (via adapter) Shaft Material: Steel Shaft Length: 32 to 35 inches Dimensions:Width (heel to toe): 4.5 inchesLength (face to back): 1.125 inchesHeight (sole to top): 1.125 inch Configurability (with included weights):Weight Range (standard configuration): 333 grams to 403 gramsWeight Range (non-standard configuration): 333 grams to 418 gramsNOTE: The high end of the weight range includes an extra 5 grams for the mounting screws.

Price: 89.99 USD

Location: Castro Valley, California

End Time: 2024-11-03T16:46:03.000Z

Shipping Cost: N/A USD