Description: #1 SELLER PREMIUM CUSTOMER SUPPORT SHIPPING WORLDWIDE 2 YEAR WARRANTY EASY TO INSTALL UNDETECTABLE Shimano EP801 and EP6 motors Tuning Kit PearTune 3.0 This Tuning kit is compatible with Shimano EP801 and EP6 motors. Compatible only with models that have active lights. This means that the light connection in the motor is active, and the display is manually programmed with ON/OFF light buttons. Compatible with Shimano EP801 and EP6 motors Unlock the full potential of your ebike! You will ride faster and experience the thrills of owning a derestricted ebike -you will love the difference! Install it effortlessly- quick plug-and-play connection - no setup required. Feel safe for your e-bike and warranty- it's safe for ebike and undetectable to keep your warranty safe! Quick plug-and-play installation. No setup! Increase the speed limiter from original 16 mph (25km/h) to 31mph (50 km/h) Enjoy it always ON or enable/disable when needed! Get after-sales support from us and a 2 year warranty from Peartune! The bike feels completely different once derestricted - it's just like a whole different bike! The rides are so much more fun now! Tuning kits are safe to your bike and every ebiker should have one installed! You will love riding your ebike with it - guaranteed! Matt - Owner of Two Wheels Empire Product details What does this Tuning Kit do? This Peartune tuning kit removes the 16mph (25km/h) speed limit, allowing the motor to help you at higher speeds. For these Shimano bikes, the speed limit is raised to 31mph (50km/h). When tuning kit is activated - real speed will be displayed up to 14-15mph (21-25km/h), at higher speeds the bike will show incorrect, slower than real speeds. How does Peaturne Work? The tuning kit can be activated or deactivated anytime by light control function of the bike menu. Refer to the bike manual. If the lights are ON, PearTune MSO is OFF. When the lights are OFF, PearTune MSO is ON. If your bike lacks an active lights port, visit a Shimano dealer to activate the lights port and have the display programmed to manually turn the lights on and off. Once activated, the tuning kit allows you to reach speeds of 25 mph (40 km/h) and even up to 31 mph (50 km/h)! To deactivate the tuning kit, turn the lights ON. Your eBike will then function as if the chip is not installed. Is this Peartune the right tuning kit for my bike? This Peartune tuning kit is made to fit all Shimano EP801 and EP6 motors. Compatible only with models that have active lights on/off function on display menu. This means that the light connection in the motor is active, and the display is manually programmed with ON/OFF light buttons. Not Compatible with Shimano E8000 / E7000 / E5000. You would need Peatune for Shimano E8000 / E7000 / E5000. Not Compatible with Shimano EP8. You would need PearTune 3.0 for Shimano EP8 How to install this tuning kit? Refer to the bike manual for detailed instructions. Installation Steps: Remove the motor cover. Disconnect the speed sensor. Loosen the screw on the positive (+) light clamp of light connection terminal. Attach the speed sensor to the MSO unit and connect the MSO unit to the motor. Connect the red power cable to the positive light clamp and tighten the screw. Secure the MSO unit in place, fasten the wiring with ties, and reattach the plastic cover. The bike is now ready. If you are planning to install PearTune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the tuning kit is activated. Installation Guide https://cdn.shopify.com/s/files/1/0051/1515/0434/files/MANUAL_-_Shimano_Panasonic_Bafang_UART_EN.pdf?v=1671527612 Important legal note Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds. Peartune products are thoroughly tested and we stand by their quality - Peartune provides 2 years warranty to all their products.
Price: 246 USD
Location: Kaunas, Kaunas
End Time: 2025-01-29T08:34:43.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Compatible Brand: For Shimano
Not Compatible ::: If you have Di2 system
Color: Black
Compatible Model: Shimano EP801 and EP6
MPN: EP801 and EP6
Material: Plastic
Set Includes: Cables, Tuning kit
Item Length: 1.4in
Battery Type: No Battery
Not Compatible:: Shimano EP8
Brand: Peartune
Unit Type: Unit
Battery Capacity: No Battery
Manufacturer Warranty: 2 Years
Voltage: 12 V
Item Height: 0.35in
Compatible Bike Type: E-Cargo Bike, E-City Bike, E-Cross Bike, E-Folding Bike, E-Mini Bike, E-Mountain Bike, E-Recumbent Bike, E-Tandem Bike, E-Trekking Bike, E-Tricycle, Universal
Not Compatible::: Shimano E8000 / E7000 / E5000
Country/Region of Manufacture: Czechia
Number of Items: 1
Item Width: 0.8in
Item Weight: 0.67oz
Part Type: Electric Controller
