Vinca DCLA-0605 Electronic Digital Vernier Caliper, 0-6 in. (150mm) New in box

Description: Vinca DCLA-0605 Electronic Digital Vernier Caliper BRAND NEW IN BOXStainless Steel Large LCD Screen Measuring Tool • Measurement range 0-6 inch/150mm• Accuracy level +/-0.001"• Resolution: 0.0005"/0.01mm, 1/128" • Display: 1/2" by 1 1/2" (13mm x 38mm) extra large screen • Features mm, inch, and fraction measurement• Comes with an installed battery, a spare battery, a protective case• Made of stainless steel• Supports inside, outside, step, and depth measurement• Features RS232 Data transfer port—must connect with "Vinca DTCR-03" cable (sold separately, not included) to make data transfer to PC. Do NOT connect with a regular USB cable.• Carrying case measures 10 x 4 x 1 • No calibration certificate included with this model Important TIPS: For all Digital Calipers, the scale printed on the body/beam is for decoration only. Reading any measuring results from this printed scale may have imprecise results. The numbers should be read from the digital display only. When assembled properly, the zero line on the printed scale should not line up with the jawline. It should line up/under the left side of the black plastic vernier cover. This digital caliper thumb wheel is designed to be loose so that it will hang on the plastic hook when not in use. This can eliminate the friction between the body/beam and the wheel, and give better movement. When doing the adjustment, just push/press the wheel toward the beam, then move back and forth to adjust. When the display numbers are blinking/flashing, please take out the old battery and install a new battery. When you notice the display numbers jump crazily, it is most likely caused by low battery. Please take out the old battery and install a new one. Sold AS IS, with no express or implied warranty.

Price: 34.99 USD

Location: Winona, Minnesota

End Time: 2024-01-01T19:59:56.000Z

Shipping Cost: 0 USD