Description: >>>XTOOL A30M MOST COST EFFECTIVE BI-DIRECTIONAL SCANNER<<< Bi-Directional Control(Active test):The scan tool can request information or command a module to perform specific tests or functions. Reinitialization and reprogramming would also be included in the list of bidirectional controls. 21+Maintenance Services:Perform Suspension,Windows Initialization,Gear Learning,Tire Upgrade,FRM Reset,EGR Relearn,Transported Mode,Seats Calibration,TPMS Reset,SRS Reset,Power Balance,etc.. Full System Diagnostic:Diagnose the avalable systems in your vehicles.There are several ways to select the model or system you want to run a diagnosis, including Automatic Detection, Manual Selection, and System Selection Lifetime Free Update:No extra fee payment,one click online update. Auto Scan:Click the AUTO SCAN button, and the models and information will be scanned.You have to select the corresponding options and confirm the vehicle information scanned. Full OBD2 Test(10 Mode):OBDII implements the standardized digital communications port and diagnostic trouble codes (DTCs) which allows scan tools to communicate with the PCM of the vehicle. To perform these functions ✅Read & Clear Trouble Codes ✅Live Data ✅Read Freeze Frame ✅Read ECU Information ✅Component Test ✅On-Board Monitor Test ✅O2 Sensor Monitoring Test ✅I/M Readiness Bluetooth Connection:Wireless diagnostic scan tool.NOTE:The normal bluetooth signal is Green color,if u meet trouble,pls contact us ASAP 14+Languages Support:Free chang to other languages.NOTE:Need send S/N and the languages you need to us ask changing 10000+Vehicles Coverage:Worldwide 98% vehicles support,from 1996 up to 2023.NOTE:The older & Newest vehicle only support a few,pls provide vehicles info consult us before purchase Built in Flashlight & Support Android/iOS Operating Systems >>>21+HOT USE SPECIAL FUNCTIONS<<< Oil Light Reset：Reset the Engine Oil Life System, which calculates the optimum oil life change interval based on the vehicle’s driving conditions and climate ABS Bleeding:Use to replace the rear brake distributor pump or the front brake distributor pump. When Severe brake fluid shortage,change the brake fluid Electronic Parking Brake (EPB) :Use to reset the electronic parking brake system and brake pads, which also supports the brake pad replacement (retraction, release of the brake pump), G-sensor, and body angle calibration D/PF Regeneration:Manages D/PF regeneration, D/PF component replacement teach-in, and D/PF teach-in after replacing the engine control module Injector Coding:Can write the identification code of the fuel injector into the Control Unit so that can recognize and work normally BMS Reset:Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle. Steering Angle Sensors (SAS):Calibration permanently stores the current steering wheel position as the straight-ahead position in the SAS EEPROM. Gearbox Match:After changing the gearbox or changing the gearbox Module, use to re-match the engine and the gearbox Throttle Relearn:Enables you to make initial settings to throttle actuators and returns the “learned” values stored on Control Unit to the default state. Also include:Instrucment Cluster,,Suspension,Windows Initialization,Gear Learning,Tire Upgrade,FRM Reset,EGR Relearn,Transported Mode,Seats Calibration,TPMS Reset,SRS Reset,Power Balance,etc.. NOTE:Functions vary by vehicles,pls provide vehicle info to consult us to check compatibility before purchase >>>BI-DIRECTIONAL CONTROL,ACTIVE TEST SCANNER<<< The scan tool can request information or command a module to perform specific tests or functions. Reinitialization and reprogramming would also be included in the list of bidirectional controls. Users could check the individual part to see which part is working properly by actuation test. >>>FULL SYSTEM DIAGNOSTIC SCANNER<<< The Diagnosis System supports 5 basic diagnosis functions: ✅ Read Module Information:To read Module-related software and hardware versions, models, and production date of the diesel engine, part number, etc. ✅ Read & Clear Trouble Code:Read trouble codes (DTCs) that are stored in Control Unit. Will give specific detailed definitions and explanations to help you locate and eliminate the car fault. ✅ Live Data:Displays the real-time parameters of the ECU ✅ Actuation Test (Bi-Directional Control):Can request information or command a module to perform specific tests or functions. Reinitialization and reprogramming would also be included in the list of bidirectional controls. ✅ Freeze Frame:Will record the top prioritized DTC. Provides a snapshot of critical parameters at the moment DTC is set. The diagnosis function can also access the electronic control unit (ECU) of all available vehicle control systems, including the engine,transmission, anti-lock braking system (ABS), airbag system (SRS), body control module (BCM), battery management system (BMS), tire pressure monitoring system (TPMS), steering and suspension system (SAS) and perform various actuation tests. NOTE: Functions is not supported by all models,pls provide vehicle info to consult us to check compatibility before purchase >>>ENHANCED FULL 10 OBD2 MODES TEST<<< OBDII implements the standardized digital communications port and diagnostic trouble codes (DTCs) which allows scan tools to communicate with the PCM of the vehicle. And the Anyscan is able to access the OBDII diagnostic functions as follows ✅ Read Trouble Codes:Read trouble codes (DTCs) that are stored in Control Unit ✅ Clear Trouble Codes :Used to clear all emission related diagnostic data such as DTCs, freeze frame data, and manufacturer specific enhanced data from the vehicle’s PCM ✅ Live Data:Displays the real-time PID data from Control Unit. ✅ Read Freeze Frame:Will record the top prioritized DTC. Provides a snapshot of critical parameters at the moment DTC is set. ✅ Read Module Information:To read Module-related software and hardware versions, models, and production date of the diesel engine, part number, etc. ✅ Component Test:This service enables bi-directional control of the ECM so that the diagnostic tool is able to transmit control commands to operate the vehicle systems ✅ On-Board Monitor Test:Allows you to view the results of On-Board Monitor tests. ✅ O2 Sensor Monitoring Test:Allows the PCM to verify that the O2 sensors are properly calibrated and functioning without noticeable deterioration under normal engine operating conditions ✅ I/M Readiness:Used to check the readiness of the monitoring system >>>10000+VEHICLES SUPPORT & MULTILINGUAL FREE CHANGING<<< The languages supported by the device are listed in Setting. The default language is set as English, if you need to switch to other languages,pls provide S/N of scanner send to us ◼ How to change the language of your software? ✅Step1: Contact your dealer and leave a message about the language you need and the S/N of your device, The technician will modify the language configuration for you in the backend system. ✅Step2: Settings->Language->Choose language ✅Step3: Back to Updates to update all the software again >>>QUICK INSTALLATION GUIDED<<< 💚Q&A💚 Q1: FAILED TO CONNECT BLUETOOTH 1. Please check whether the status of the indicator light of the Anyscan is working properly. 2. The Bluetooth indicator lights blue when the Bluetooth has successfully connected; the power indicator lights red when the Anyscan is connected to the vehicle or power supply properly; the vehicle indicator lights flash green when the Anyscan is successfully communicated with the vehicle. If the indicators do not light up, it means that there are hardware defects. 3. Anyscan can log in on multiple mobile devices at the same time, but only one device can be connected via Bluetooth at one time. If your device lights up in blue, but you fail to connect your device, please check whether your Anyscan is automatically paired with other mobile devices. 4. For Android users, the Bluetooth setting of OS will only pair the Anyscan device, but not actually connecting the Bluetooth, the Bluetooth indicator may not light up. You may need to connect the Bluetooth within the app, make sure that the Anyscan device is selected in the Bluetooth setting. Blue tick symbol should shown next to the selected device. Q2: HOW TO SWITCH LANGUAGE 1. Contact your dealer and leave a message about the language you need and the S/N of your device, The technician will modify the language configuration for you in the backend system. 2. Settings->Language->Choose language 3. Back to Updates to update all the software again Q3: FAILED TO DIAGNOSE VEHICLE 1. Contact your dealer to confirm whether the vehicle model is supported by the scan tool you owned. 2. Check whether the vehicle is properly connected. (The requirements may vary from brand or model, please follow the instructions displayed) 3. Confirm whether you have entered the correct diagnosis menu 4. Try whether the AUTO SCAN function can assist you to enter the correct diagnosis menu 5. Check whether the software is the latest version, if not, please update to the latest version first. Q4: FAILED TO ACTIVATE OR REGISTER ⚫ For ‘Activation Failed’ Generally caused by network instability, please switch to a more stable network and try to activate again. ⚫ For ‘Registration Failed’ Generally, it is caused by the connection timeout or the sending timeout, please check whether you have blocked the outgoing network traffic to non-US regions like China. We recommend that you unblock and try to register again. On Oct 17, 2023 at 04:59:01 PDT, seller added the following information:
Price: 179 USD
Location: Rancho Cucamonga, California
End Time: 2023-11-25T05:14:20.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: XTOOL
Type: OBD2 Scanner
OBD Interface: OBDII
Supported System: ABS, EPB, SAS, SRS, TPMS
Vehicle Type: Heavy Duty/Commercial
Warranty: 2 Year
Connectivity: Bluetooth
Features: Backlit Display, Built-In Battery, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly, Check Engine Light Shut Off
Accessories: Adapter Cable, Carrying Case, User Guide
Model: XTOOL Anyscan A30M
Software Version: 2023 NEWEST
Fit for: Android & iOS OS
Advanced Features1: Full System Diagnostic
Advanced Features2: 21+Maintenance Services
Advanced Features3: Full OBD2 Test
Advanced Features4: Auto Scan
Advanced Features5: Lifetime Free Update
Advanced Features6: Bi-directional Control(Active Test)
30+Special Services1: Oil Reset,EPB,SAS,BMS Reset,Throttle Relearn,D-P-F,TPMS Reset
30+Special Services2: Injector Coding,ABS Bleeding,Gearbox match,Suspension
30+Special Services3: Headlamp,Windows initialization,Seats calibration,Gear Learning
30+Special Services4: Airbag Repair,Instrument Cluster,Tire Upgrade,Power Balance
30+Special Services5: Transporte Mode,Electronic Pump Activation,etc...
Manufacturer Part Number: A30M
